View equipment
CNC Wire EDM & Sinker EDM
Burr-free profiles and sharp internal corners in hardened tool steel and tungsten carbide.
View specifications
Simultaneous 5-axis milling for complex die cavities, forming faces and non-standard tooling bodies.
This equipment is used in our own workshop to machine, treat and inspect your custom tooling.
Complex die geometry rarely fits a three-axis setup. Our 5-axis machining centres cut cavities, forming faces and angled pockets in a single clamping, which keeps the relationship between features accurate and removes the stack-up of re-fixturing errors.
Programmes are generated directly from the approved 3D die model, and a first-article dimensional check is carried out before the part moves on to heat treatment or grinding. Prototype dies and repeat tooling are machined on the same platform, so a validated geometry can be reproduced later without re-engineering.
| Axes | 5 simultaneous |
|---|---|
| Working envelope | 600 × 600 × 500 mm |
| Positioning accuracy | ±0.005 mm |
| Spindle speed | Up to 18,000 rpm |
| Typical workpiece | Die blocks, inserts, forming faces |
Send us your specification and get a free engineering review and quotation — usually within 12 hours on working days.