View details
Cold Heading Die for Stainless Steel Screws
Main forming die with a precision-ground cavity for heading A2 / A4 stainless steel screws and small bolts.
Learn more
Ground bushing and sleeve for guiding punches and ejector pins in cold heading stations.
Need a different size or material? Send your drawing — every tool is made to order.
Bushings keep the punch and ejector pin aligned through millions of strokes. A worn or misaligned sleeve shows up as inconsistent head geometry and premature punch failure, so we grind the bore and outside diameter in one setup to hold concentricity.
Bushings are made in tool steel, high-speed steel or carbide depending on the load and the required wear life. Inner and outer dimensions, length, flange and oil grooves are all made to your drawing.
These parts are commonly ordered together with punches and ejector pins as a complete station set, which reduces fitting time on the machine.
| Tool Type | Punch bushing / guide sleeve |
|---|---|
| Material | Tool steel / HSS / tungsten carbide |
| Bore Tolerance | H6 or to drawing |
| Concentricity | ≤ 0.01 mm |
| Hardness | HRC 60–64 |
| Options | Flange, oil groove, stepped OD |
| Machine | Cold heading / stamping station |
| Lead Time | 7–15 working days |
Send us your specification and get a free engineering review and quotation — usually within 12 hours on working days.