Wire Drawing Dies · KY-WDD-512

Tungsten Carbide Wire Drawing Die

Carbide drawing die with polished bearing zone for preparing stainless wire to exact heading diameter.

  • Polished bearing zone for low friction
  • Controlled reduction and relief angles
  • Special-shaped bores for profile wire
  • Actual bore diameter recorded per die
  • Stock blanks for fast delivery

Need a different size or material? Send your drawing — every tool is made to order.

Product Overview

Consistent wire diameter is the foundation of stable cold heading. Our tungsten carbide drawing dies control the reduction, bearing and relief zones so the wire feeds smoothly into the header with minimal friction and heat.

Standard round bores are available from stock blanks, and special-shaped profiles can be produced for non-round wire. Each bore is polished and measured, with the actual diameter recorded on the inspection sheet.

Tell us the incoming wire diameter, target diameter, material grade and lubricant type, and we will recommend the reduction angle and bearing length for your line.

Technical Specifications

Tool TypeWire drawing die
Bore MaterialTungsten carbide (PCD on request)
Bore Range0.5–20 mm
ProfileRound or special-shaped
CaseSteel case, standard or to drawing
Bearing FinishPolished, Ra ≤ 0.2 μm
WorkpieceStainless steel wire
Lead Time7–15 working days

Typical Applications

Stainless wire preparationFastener wire drawingSpring wireProfile wire
READY WHEN YOU ARE

Have a Drawing or a Tooling Problem to Solve?

Send us your specification and get a free engineering review and quotation — usually within 12 hours on working days.