From Drawing to Trial Run: Our Custom Tooling Workflow

What happens between sending a part drawing and receiving a finished die set — and which details speed up the quotation.

From Drawing to Trial Run: Our Custom Tooling Workflow

A custom die order does not start with machining. It starts with a clear understanding of the part, the machine and the production target. The more of that information arrives with the first inquiry, the faster and more accurate the quotation.

The first stage is engineering review. Our team checks the part drawing for forming feasibility, calculates the upset ratio and forming load, and proposes the die split, cavity geometry, steel grade and coating. If a drawing is not available, a physical sample or a photo with key dimensions is often enough for a preliminary proposal.

Once the design is approved, material is cut and rough machined, then heat treated to the specified hardness. Precision grinding, EDM and polishing follow, because the cavity surface finish has a direct effect on friction and part release. Coating is applied after finishing, never before.

Inspection is done against the approved drawing: cavity dimensions, concentricity, hardness and surface finish are recorded, and a report can be shipped with the tools. Where the geometry is new, a trial run with a small batch gives the customer real parts to measure before committing to a full set of tooling.

The whole process typically runs 15–30 working days for fully custom dies and 7–15 days for repeat or standard items. Keeping design, machining and inspection in one factory is what makes that timeline predictable.

Need help choosing the right tooling?

Send your part drawing and our engineers will recommend the die material, geometry and coating.

Request a Quote